Hello, Aaron here from CarbonFabrik.
I didnt read all of your Posts here, but i found out that some are concerned regarding wether or not it is the right weave. As some pointed out, the EU Model is LHD, thus the center console is orientated right of the steering wheel. Normally OEMs like to produce carbon parts on the right side of the driver as "right-running", meaning, the visible line (in germans its "Köpergrat" (Twill ridge/burr)) is orientated to the right. Everything that is on the left side of the driver will be orientated left.
Since the consoles I did until now have all been LHD consoles, the weave always was running to the right side. In Order to adapt to the RHD-spec Carbon parts I just need to flip the fiber once and turn it 90° to have it on the same way like RHD OEM has it.
The weave, satin (atlas) 1/4 is identical to OEM. The weight of the fabric (specifing how dense the weave is -> Higher number "rough" -> Lower Number "fine") is identical to OEM. I didnt have an RS3 8Y in my Shop yet, so I had no oppurtunity to measure it, but I know how long the quattro Emblems are (approx 70mm), if you count the threads per distance you will find the missing number to specify the weave (Threads per cm/inch/whatever measure you want to use).
Attached is a picture of the current version. The clear coat has been furhter adapted to the gloss grade of OEM. Audi is specifing it as "matte", but its more like a shiny satin matte. Took me quite a few samples.
I hope all questions are answerd, if you have any further dont hesitate to contact me at info@carbonfabrik.com
Btw: I will be producing some RHD consoles in July, they will probably be in stock by the end of July. Preorders will be served first.
You guys ship to the United States correct?