Feel free to add what you’ve done / doing.
Fitted this today…….
Sent from my iPhone using Tapatalk
Wtf is that?
Sent from my iPhone using Tapatalk
Canbus immobiliser.
Similar to Ghost.
Sent from my iPhone using Tapatalk
Self-fit or paid to fit. Similar colour wires to Ampire module you posted sometime ago.Feel free to add what you’ve done / doing.
Fitted this today…….
Sent from my iPhone using Tapatalk
Self-fit or paid to fit. Similar colour wires to Ampire module you posted sometime ago.
No, there is no cutting of Can wires.I take it the two twisted pairs of wires on the scorpian need the can bus to the gearbox cutting?
So, I just popped into Audi to get my silver trim dash piece changed, I asked the service guy what didnt invalidate Audi's warranty? How about a Ghost? replay ''they're fine I have loads of customers with those fitted, they only affect warranty if they cause the fault'',No, there is no cutting of Can wires.
So, I just popped into Audi to get my silver trim dash piece changed, I asked the service guy what didnt invalidate Audi's warranty? How about a Ghost? replay ''they're fine I have loads of customers with those fitted, they only affect warranty if they cause the fault'',
So I replied ''Audi UK says they void the warranty'' ''well in that case then I wouldnt fit one''
*** it's hard
Today I mostly welcomed back beading! Next job is wheels off and coat after I shift covid.
View attachment 252147
I have no idea could it prevent over the air software updates maybe?What fault would it cause ?
Sent from my iPhone using Tapatalk
I have no idea could it prevent over the air software updates maybe?
I need to look into it further to see how it connects into the car and the can bus unless you can shed some light on the subject ?
I'm tempted to fit something my self, but for the life on me I cannot find any wiring diagrams of the engine ecu and ancilliary's, something like a bit of wizadry with a relay and a timer relay so it blows the horn for 20 seconds instead of starting when the start button is pressed would work I thinkIt’ll not affect any OTA updates.
Sent from my iPhone using Tapatalk
That's nice. Really tempted to lower it - it's obviously very early days but would appreciate if you can let us know if it's massively detrimental to the ride quality.This would be the eibach sport line kit with bimecc 12mm(f) and 15mm(r) done today at R44 on my filthy saloon, lucky it's booked in for new car detail (multi stage decontamination wash process followed by a single stage machine polish to remove any swirls picked up. Layer of ceramic coating on the paintwork & alloy wheels, dress the plastics, clean windows inside & out, protect floor mats & protect the seats) next week
View attachment 252530
Looks good, imagine how lost the wheels would look without spacers!
Feel free to add what you’ve done / doing.
Fitted this today…….
Sent from my iPhone using Tapatalk
Taken off the car.
Avoid this like the plague, yes it stops the car being started, but there’s a way to circumvent it.
Not good at all.
Sent from my iPhone using Tapatalk
When I had the ghost fitted they said a few cars could be bypassed with it installed, though rare, but I also had a crank cut relay fitted at the same time.
That's nice. Really tempted to lower it - it's obviously very early days but would appreciate if you can let us know if it's massively detrimental to the ride quality.
As far as I am aware, no, but I didn't stay around during fit, disappeared down to Olympic way for about 3hrs before heading back to collect the car and home.Looks good, imagine how lost the wheels would look without spacers!
I think that the Sportline springs might be a little too low for my personal taste/driveway entry, hopefully someone will fit a Pro-kit set soon with some spacers and I can get a comparison before I do either.
Did they re-calibrate your suspension and cameras and things for you at the same time? Is that something you have to do on the 8Y's I presume?
Looks spot on mateThis would be the eibach sport line kit with bimecc 12mm(f) and 15mm(r) done today at R44 on my filthy saloon, lucky it's booked in for new car detail (multi stage decontamination wash process followed by a single stage machine polish to remove any swirls picked up. Layer of ceramic coating on the paintwork & alloy wheels, dress the plastics, clean windows inside & out, protect floor mats & protect the seats) next week
View attachment 252530
Anybody still have that protective film on the silver bits on the door switches? I noticed it on there a few days ago and still haven't yet removed it the car is young, there's plenty of time
Anyway...
View attachment 252976
a good profile shot at @fmdetailing yesterday
Have you dropped it?? Eibach??Anybody still have that protective film on the silver bits on the door switches? I noticed it on there a few days ago and still haven't yet removed it the car is young, there's plenty of time
Anyway...
View attachment 252976
a good profile shot at @fmdetailing yesterday
Sportline? Spacer dimension? Car looks superb!Yep, scroll up a bit, post 17, 18
First wheels off session.
Full decontamination, clay, degrease and a coat of Red Mist. Gave the brakes a coating too as well as remote the massive white QR code sticker.
I had to kick the rear wheels off due to dissimilar metal corrosion, thought they'd slip off after only 4 months of being mated.
View attachment 253083View attachment 253084View attachment 253085View attachment 253086View attachment 253087